The Bargeboard Look of Victorian Wood Trim

Bargeboard is exterior house trim, usually ornately carved, that is attached along the roof line of a gable. Originally, this Victorian wood trim — also called vergeboard or verge board (verge being the end or edge of a thing) —Â   was used to hide the ends of rafters. It hangs from the projecting end of a gable roof. Bargeboards are often elaborately hand-crafted and found on homes in the Carpenter Gothic style and what is commonly known as the Gingerbread cottage. Bargeboards are also sometimes called gableboards and can attach to barge rafters, barge couples, fly rafters, and gable rafters. It is sometimes spelled as two words — barge board. It was commonly used throughout a growing and prosperous America in the late 1800s. Examples of bargeboard can be found on the Helen Hall House in West Dundee, Illinois (c. 1860, remodeled c. 1890) and a typical Victorian-era residence in Hudson, New York. Used as ornamentation, bargeboard must be maintained and replaced to keep the Victorian-era look on todays historic dwellings. Definitions of Bargeboard A board which hangs from the projecting end of a roof, covering the gables; often elaborately carved and ornamented in the Middle Ages.— Dictionary of Architecture and Construction Projecting boards placed against the incline of the gable of a building and hiding the ends of the horizontal roof timbers; sometimes decorated. — The Penguin Dictionary of Architecture In older homes, bargeboards may have already disintegrated, fallen off, and never replaced. The 21st century homeowner might consider adding this detail to restore a historic look to a neglected gable. Look at he many books that illustrate historic designs, and either make it yourself or contract out the job. Dover publishes several books including 200 Victorian Fretwork Designs: Borders, Panels, Medallions and Other Patterns (2006) and Roberts Illustrated Millwork Catalog: A Sourcebook of Turn-of-the-Century Architectural Woodwork (1988). Look for books that specialize in Victorian designs and house trim, especially for Victorian Gingerbread details. Why is it called barge board? So, what is a barge? Although barge can mean a type of boat, this barge comes from the Middle English word berge, meaning a sloping roof. In roof construction, a barge couple or barge rafter is the end rafter; a barge spike is a long spike used in timber construction; and a barge stone is the projecting stone when a gable is built of masonry. Bargeboard is always placed up near the roof, on the piece of roof that overhangs to form a gable. In revivals of Tudor and Gothic style architecture, the pitch of the roof can be very steep. Originally the end rafters — the barge rafters — would extend beyond the wall. These rafter ends could be hidden from view by attaching a bargeboard. The house could achieve greater decoration if the bargeboard was intricately carved. It was a functional architectural detail that has become purely ornamental and character defining. Maintenance of Victorian Wood Trim You can remove rotten bargeboard from a house without harming the structural integrity of the roof. The bargeboard is ornamental and is not necessary. However, you will change the appearance — even the character — of your home if you remove the bargeboard and do not replace it. Changing the style of a home is often not desirable. You do not have to replace rotted bargeboard with the same style if you dont want to, but youll have to check if youre in a historic district. Your local historic commission will want to see what youre doing and will often have good advice and sometimes even historic photos. You also can buy bargeboards. Today its sometimes called running trim or gable trim. Should I buy plastic bargeboard made of PVC so it wont rot? Well, you could, if your house is not in a historic district. However, because bargeboard is an architectural detail found on houses of certain historic eras, would you really want to use plastic? Youre right that PVC may last longer than wood and this trim area does have the potential for a lot of moisture runoff. But vinyl or aluminum that is sold as virtually no maintenance does require cleaning and repair, and its likely to age differently (for example, the color) than the other materials on your house. Mixing wood or masonry with plastic may make your house look a bit artificial. Bargeboard is a decorative detail that gives a house character. Think hard about detracting from the natural character of your home by using a synthetic material. Can I make my own bargeboard? Yes, you can! Buy a book of historical designs and experiment with different patterns and widths. Remember, though, that bargeboard will be easier to paint before you attach it to high places. You might even engage the local public school shop teacher to make your project into a student project. Ensure the proper permissions (e.g., historic commission, building code) before going ahead with any project that changes the look of your house. And remember — if it looks awful, you can always remove it and begin again. Sources Photo of Cape Cod Gingerbread Cottage by KenWiedemann/Getty ImagesPhoto of Helen Hall house by Teemu008 on flickr.com, Creative Commons Attribution-ShareAlike 2.0 GenericPhoto of Hudson, NY house by Barry Winiker/Photolibrary/Getty ImagesDictionary of Architecture and Construction, Cyril M. Harris, ed., McGraw-Hill, 1975, p. 40The Penguin Dictionary of Architecture, 1980, p. 28

Nanotechnology The World Of Nanotechnology - 843 Words

Nanotechnology in Body Armour The world of nanotechnology has advanced rapidly in the last decade. The ability to alter particles on an atomic scale has revolutionised many jobs, including the protection of the armed forces. Body armour altered on the nano-scale has the potential to save the lives of many defence personnel. The existing body armour, called Kevlar, is synthetic plastic fibres woven together to form a flexible but strong material. While Kevlar is good at stopping bullets from penetrating the flesh, the resulting blunt force trauma (BFT) is enough to break ribs and, in extreme cases, cause organ damage. This is where nanotechnology excels. The upgraded body armour spreads the impact out to reduce BFT. There are a few†¦show more content†¦This creates a super strong material known as CNT. Due to the electron configuration of carbon (1s2 2s2 2p2) â€Å"Nanotubes are entirely composed of sp2 bonds, which are even stronger than the sp3 bonds found in diamond.† (Devina C, Holly P, Reem R., 16/2/17). This is why carbon nanotubes are hundreds of times stronger than steel. The silicon dioxide (SiO2) in STF also have strong bonds. Silicon is atomic number 14, meaning that there are four electrons in the valence shell. This combines with oxygen, with an atomic number of 8 and electron configuration of 1s2 2s2 2p2. With silicon needing 4 electrons to be stable, and oxygen needing 2, two oxygens share electrons with one silicon, resulting in two double bonds. The incredible strength of carbon nanotubes is displayed in diagram 1. The bullet impacts the fabric at approximately 2500 m/s, and after decelerating, bounces off the fabric at approximately 2000 m/s. The once the bullet hits the nanotubes, the deceleration is incredibly quick. The bullet decelerates at approximately -1.56x10^15 m/s/s. It can be assumed that the test fabric hadn’t been used before the experiment. After repetitive ballistic impacts the CNT start to deform, thus reducing their effectiveness in stopping projectiles. This is displayed in the diagram 2. The length of nanotubes also affect their ability to absorb external forces, as shown inShow MoreRelatedEssay about Nanotechnology: The Key to a Better World1121 Words   |  5 Pagescompletely unscathed from the water and rock. This is the power of nanotechnology. Not everyone knows what nanotechnology is. In order to get a basic understanding of what it is, it is necessary to know the general description of nano technology, how it is built, why the nanoscale is important, when it started, and how it can benefit society. Nanotechnology should be understood by everyone because it can truly improve the world. Nanotechnology is science, engineering, and technology conducted at the nanoscaleRead MoreNanotechnology : Developing Technology And Developing Nations1451 Words   |  6 Pagesyears, nanotechnology may be bundled in a lot of the discussions taking into consideration appearing technologies as well as developing nations. Nevertheless, the materials taking into consideration nanotechnologies towards establishing earth possesses frequently assorted in the interpretation associated with just what nanotechnology in fact is. Additionally, despite a wide range of perspectives towards the meaning, appropriateness as well as possible result associated with nanotechnology regardingRead MoreA Brief Note On The World Of A Big World1286 Words   |  6 PagesRachhpal Singh 12/10/15 Eng. 125 Mr. Jordan Dakin Really Small Thing in a Big World With the boom of modern technology in the late 19th century it has only grown from helping human like through medical innovations to bringing the worst of humanity in the time of war like weaponing tear gas by the French then poison gas by Germany in World War 1. This has not been the first advances in technology. Railroad made transporting large quantity of products from one states to the others faster. TelegramsRead MoreThe Wide Possibilities of Nanotechnology Essay953 Words   |  4 Pagesand advancements. Everyday, our science community continues to come up with new ideas to improve the world, especially in nanotechnology industry. The technologies that scientists have developed have greatly impacted the world. New technological discoveries are constantly being made in this this field, and projects are underway that will soon be used in the future years. The expansion of nanotechnology will improve the lives of many citizens because scientists are currently implementing the fi ndingsRead MoreThe Impact of Nanotechnology in Our Lives1523 Words   |  7 PagesThe Impact of Nanotechnology in Our LivesNanotechnology is science and engineering at the scale of atoms and molecules. It is the manipulation and use of materials and devices so tiny that nothing can be built any smaller. It refers to the use of materials with nanoscale dimensions, ranging from 1-100 nanometers. Nanotechnology impacts our lives today in many ways, such as economically, socially, environmentally, ethically, and more. Nanotechnology is used broadly in many ones daily life. ManyRead MoreNanotechnology Essay604 Words   |  3 Pagesnbsp;nbsp;nbsp;nbsp;nbsp;Nanotechnology is the creation of functional materials, devices and systems through control of matter at the scale of 1-100 nanometers, and the exploitation of novel properties and phenomena at the same scale; nanotechnology is also called molecular manufacturing. Nanotechnology is a result of the combination of different scientific fields such as physics, biology, engineering chemistry, and computer science in addition to many more. The foundation of nanotechnology is that atoms makeRead MoreThe Impact of Technology on the US Economy: The Development of Nanotechnology1725 Words   |  7 Pagesof technological development. As a result, United States technological development has made a significant contribution to its robust economy. Since the technological development continues to rapidly grow to the present date, specifically the nanotechnolog y sector, the United States is pursuing to develop and expand its appropriate institutional mechanisms and policies to better manage the technological development. Currently, there are debates to whether the free market mechanism or government interventionRead More Ethics of Nanotechnology Essay1558 Words   |  7 PagesEthics of Nanotechnology Nanotechnology is actually a fairly new idea. This may not seem like any big deal in terms of ethics, but just like any type of scientific advancement there are positives and negatives. Of course the ethical issues don’t stem out of just the fact that this is a new kind of science. It branches off of â€Å"what will this new scientific technology be used for?† For example, Embryonic Stem Cell research. It’s not the research that’s bad it’s how they get the cells. There areRead More Nanotechnology Essay1678 Words   |  7 PagesNanotechnology Jeremy Rifkin wrote, in his article Biotech Century: Playing Ecological Roulette with Mother Natures Design, Humans have been remaking the Earth for as long as we have had a history. Well the path of history humans have chosen to take also affects how we remake the Earth. In Neal Stephensons novel, The Diamond Age, one is shown how the technology of the time reshapes the political, economical and educational aspects of history. That technology is the manipulation of moleculesRead MoreEthics of Nanotechnology1578 Words   |  7 PagesNanotechnology Nanotechnology is actually a fairly new idea. This may not seem like any big deal in terms of ethics, but just like any type of scientific advancement there are positives and negatives. Of course the ethical issues dont stem out of just the fact that this is a new kind of science. It branches off of what will this new scientific technology be used for? For example, Embryonic Stem Cell research. Its not the research thats bad its how they get the cells. There are half

Auditing and Assurance Services An Integrated Approach

Question: Discuss about the Auditing and Assurance Services for An Integrated Approach. Answer: Introduction This case study deals with performing substantive procedures (test of details) and their role in obtaining audit evidence. It is important to design the substantive procedures in such a way that it is in tune with the analytical procedures (test of controls). After performing the test of controls, if the inherent and control risk is found to be high, then the auditors must perform more substantive procedures in order to minimise the detection risk so that the overall risk is maintained at a tolerable level. Substantive Procedures Substantive Procedures or Test of Details are performed to examine accounting data i.e. completeness, accuracy and validity of transaction and balances. Substantive proceduresfor material classes of transactions, account balances, and disclosures are always required to obtain sufficient competent audit evidence due the limitations of internal controls and the subjective nature of the auditors judgments when making risk assessments regarding the entity and its environment. Therefore, the auditor will have to design substantive procedures for all relevant assertions to obtain sufficient appropriate audit evidence, regardless of the assessed risk of material misstatement. Proper tests of controls have been carried out by the auditor which determines the level of inherent and control risks as low. However, it is imperative that proper test of details are undertaken so as to keep the detection risk low as well so that the overall risk is maintained at an acceptable level. Following test of details can be carried out that will provide sufficient appropriate audit evidence regarding the accuracy of that account balance. 1. Wages and Salaries: The auditor can compare the total wages of current period that of prior year/budgets. In case a difference is found, the auditor needs to investigate the same. It is important to verify that the employees are paid for the period that they have worked. 2. Electricity: Check bills to make sure that expense for the respective period have only been recorded. It is important to make sure that the expenses recognized, pertain to current period only and that no bills of previous period have been recorded as expense in the current period. 3. Repairs and Maintenance: Check the bills to ensure that heavy repairs, which increase the life of asset, have not been shown as repairs but as capital expenditure instead. Similarly the routine repairs, which do not increase the life of asset must not be capitalised. These substantive procedures will assist the auditor in obtaining sufficient and appropriate audit evidence. Introduction There are three components of Audit risk, viz. inherent risk, control risk and detection risk. Inherent risk and control risk are assessed together because both these risks can be detected or prevented by designing suitable internal control system. Analytical procedures or test of controls are performed by the auditor to determine the level of risk. Substantive procedures are performed to examine accounting data. Audit risk model is used to manage the overall risk of an audit engagement. Thus when inherent risks and control risks are high, detection risk has to be set to a low level of acceptance to reduce the overall audit risk to a tolerable level. Conversely, when inherent risks and control risks are low, acceptable detection risk is allowed to be set at a relatively higher level. Lower detection risk may be achieved by increasing the sample size for audit testing. If detection risk cant be minimised, the auditor should express a qualified opinion. This case study deals with the a uditors observations regarding level of risk. Review of work In the given case, the audit assistant undertook a test of controls for 50 sales transactions and found three errors, i.e. 6 percent which is higher than the established tolerable error level of 5 percent. Since the errors were not material, individually or in aggregate, she concluded that the controls were reliable. However, this assumption may lead to fault in the overall audit. Although not material in nature, the error found was higher than the tolerable error. Instead of concluding that the controls are reliable, she should have performed the procedure on another sample to make sure that this was just an anomaly. This way, there could be enough evidence that the controls are reliable. While performing test of details for accounts payable, the audit assistant selected all balances over $100,000 and vouched these to supporting invoices. The sample selected comprised $2,565,650 of total accounts payable of $5,168,000. One invoice for $102,500 had been incorrectly recorded on the accounts payable listing, as the goods were not actually received until after year end. Given the error relates to only 4% of accounts payable tested, which would be a total error of $206,702 of the overall accounts payable balance, she concluded that it is not material as this is less than the materiality level set for this audit and, therefore, no further work has been performed. Now this would have been right had the control risk been below tolerable level. But since control risk is above tolerable level, acceptable detection risk had to be low in order to keep the overall risk at an acceptable level. The auditor should have performed more intensive test of details in order to reduce the detection risk to an acceptably low level. Conclusion From the above review, it is clear that the auditor was not correct in her observations. Instead of concluding that the internal control was reliable, in the first case, more test of controls should have been performed. In the second case, she should have performed more tests of details to make sure that the audit evidence collected is sufficient and appropriate. The overall audit risk is to be maintained at a tolerable level at all times which was not done by the audit assistant in her work for Orange Pty Ltd. References: Arens, A.A., Loebbecke, J.K., Elder, R.J. and Beasley, M.S. (2003)Auditing and assurance services: An integrated approach. United States: Addison Wesley Longman. ACCA (2015) Audit Risk. Available at: https://www.accaglobal.com/in/en/student/exam-support-resources/professional-exams-study-resources/p7/technical-articles/audit-risk.html (Accessed: 29 May 2016). ACCA (2015) Analytical Procedures. Available at: https://www.accaglobal.com/in/en/student/exam-support-resources/professional-exams-study-resources/p7/technical-articles/analytical-procedures.html (Accessed: 29 May 2016). ACCA (2015) Audit Procedures. Available at: https://www.accaglobal.com/in/en/student/exam-support-resources/fundamentals-exams-study-resources/f8/technical-articles/audit-procedures.html (Accessed: 29 May 2016). ISA 315,Identifying and Assessing the Risks of Material Misstatement Through Understanding the Entity and Its Environment, paragraph 4 (b). ISA 330,The Auditors Response to Assessed Risk, para. A42-A51

Who Won the Mexican Revolution and When Did it End free essay sample

This study of the Mexican Revolution debates if the revolutionaries successfully obtained their objectives, or whether the revolution still goes on today. This essay examines the purposes of the Mexican Revolution, from its early days as an anti-capitalist demonstration against its government, to the repeated claims by Mexican leaders that the revolution is over, having embraced capitalism whole-heartedly. In July 1914, General Carranza proclaimed the revolution over. In 1928 Calles proclaimed the revolution achieved. In 1940 President Camacho said the same thing. There are those who believe the revolution still to be going on; it is only in the last couple of years that the PNR has finally been voted out of power; Mexico, though a democracy, had effectively been a one party state until very recently.

Southern Culture essays

Southern Culture essays Todays society is dominated by stereotypes and misconceptions; the way that we talk, walk or even look has a large impact on the way other human beings judge us. Therefore, it should come as no surprise that some people associate the Southern accent with a lack of education or laziness. Despite this fact, Southerners continue to maintain their unique dialect, and ignore stereotypes that they are often forced to undertake. In fact, to many southerners their dialect is more than a way of speaking, it is a long standing tradition that goes far beyond the language. The Southern dialect is the product of a wide array of cultural and ethnic influences. Both the French and African slaves had a large impact on the Southern way of speaking. Because the French dominated most of the Southern and Western American regions during the 18th century, their way of speaking was highly influential on the Southern culture. Just as the French significantly contributed to the Southern dialect so too did the African slaves. The large populace of African slaves played a large role in todays Southern accent. Furthermore, because the South is largely agricultural, the people tended stay in one location thereby allowing for the development of a deep rooted, distinct accent. Many historians believe that todays Southern dialect is largely attributed to cities such as Richmond, Charleston and Savannah due to their historical importance in the South. The Southern accent today is ever changing and even within the south there are a wide variation of accents. For ex ample, the Gullah way of speaking is predominantly spoken by Southern blacks living in Georgia and South Carolina; it is a combination of English and Western African dialects. The Coastal Southern dialect includes words such as dope (soda) and doughnuts (cookies) which are terms that are not used in other Southern regions. In addition, many people from ...

Perception Of Nurses Regarding Self-Harming Patients Literature review

Perception Of Nurses Regarding Self-Harming Patients - Literature review Example The people that have self-harmed them are found to be devoid of the needed sympathy and care from the medical staffs and nurses on being admitted to the emergency units. Nurses tend to avoid them on account of wrong perceptions making them feel more desolate. This in turn again contributes in enhancing his or her self-farming behaviour which sometimes turns out to be fatal culminating to suicide (Cleaver, 2006, p.148-151). The paper would tend to use research based articles tends to focus on the attitudes and attributes of the nurses pertaining to the self-harming patients and also on the process of bring about attitudinal changes in the nurses involved. Further it would also endeavour in using specific statistical techniques relevant to the topic to help enhance the understanding and also cites recommendations pertaining to the issue taken. Cleaver (2006) observes that the act of self-harm constitutes such actions where the person, either a male or a female either tends to position, bruise or burn oneself. In that, the person focuses on injuring his or her own body as a mark of punishment rendered on oneself. This sense of punishment alleviates and culminates to the act of self-harm where the individual feels that such act would help him or her to regain their position in the society. More specifically, the people rendering self-harm tend to suffer from a huge burden of desperation. They, in order to evoke the sense of fear in the minds of others or to reinstate their position tend to act in such forceful manner. Observation shows, that this act of self-harm gains more prevalence pertaining to people in their teenage years and also in adults. Children, though quite rare become the silent victims of self-harm. Again, the phenomenon of self-harm is more noticeable regarding women folk than in men. Men are more prone to acts of suicide than ceasing to causing only self-harm like in women. Thus, owing to the variance reflected in the above cases the nurses working in the emergency units are required to act accordingly to render effective services. Herein, Cleaver (2006) states that some nursing staffs feel the zeal to take to such challenging assignments that includes a large amount of variations. Nursing staffs need to be trained in subjects pertaining to psychoanalytic and risk assessments to effectively function in such traumatic departments. The nurses and palliative care staffs need to understand the potency of the risk associated in dealing with such patients and

Capstone PROJECT Article Example | Topics and Well Written Essays - 500 words

Capstone PROJECT - Article Example Martin Luther King was one of the major champions of great principle, laboring and sacrificed his life to advance the cause the equal rights for all individuals within United States of America (Bloom & Blake Web). Various people have discussed about the American dream but so far it has never been achieved Short documentary film to be created by own cinematic masterpiece in a showcase (Crosby et al Web). My opinion and belief on the American dream is that it will one day be achieved (Gibson &Mark Web). The impact of achieving the American dream will provides the people of American the first chance to job opportunities. The objectives should reflect the past and present beliefs, values and experiences. Further, the objectives try to demonstrate the thoughtful consideration of rhetorical choices to achieve the purpose (Kopple Web). To admire the political rights to all including the Republic and Democrats, the leaders elected are supposed to be committed. However, it helps in gaining a proper critical distance while considering the King’s advice (Mailer Web). The King suggested people to love their enemies in order to foster the development and continuity of the people within the United States. The project will have a professional quality workmanship. This can be achieved through proper working skills in collecting the necessary information’s (Newlin Web). Further, the parameter should contain a meaningful and purposeful chosen text track that can provides understandable and content of the American Dream (Ramsay Web). While using the while using visuals and audios, both should have an open meaning to allow quick understanding to the people of the United States. The process of projects varies with the choice of the researcher. However, the process used should have maximum provision of evidence and facts to all individuals (Obama Web). Use of the photographs is always preferred since it always tries to provide facts and is durable.